Installing The Turbocharger; Fig. 8: Placing The Turbocharger - ABB A200-L Operation Manual

Operation Manual / A200-L
3 Removal and installation / 3.3 Installing the turbocharger
3.3

Installing the turbocharger

3.3.1 Placing the turbocharger on the bracket
Fig. 8: Placing the turbocharger
Remove covers from the oil connections.
u
Align turbocharger and place on engine bracket.
u
Tighten the fixing screws (Steps for fastening the turbocharger) while only slightly
u
loosening the lifting gear.
Remove lifting gear from turbocharger.
u
Connect cable to speed sensor.
u
Connect all gas, air and oil pipes.
u
See also
2 Steps for fastening the turbocharger [} 29]
© Copyright 2021 ABB. All rights reserved. HZTL4036_EN Rev.T December 2021