4 Get Started
4.1 Power On/Off
Note
Please charge the device for 3 hours in the status of
•
power off before using it for the first time!
When the device is off, it can be started by pressing the
Power On/Off button for 3s; the screen then displays the
"PHILIPS" logo. See the picture below:
Then the device displays the preview interface as seen in
the following figure. On this interface, the status indicator
becomes green; press Menu button quickly to return to the
Settings interface. Long press " " or " " to zoom in or out
the preview interface. Press "sensitivity" button and the menu
will pop-up, then the record gains setting will be available.
EN
50
Note
The device has a built-in lithium battery. If the device is
•
idle for a long time, please turn off the device by pressing
the Power On/Off button for 3 Sec.
If the device doesn't work normally, please make sure the
•
device is not out of power.
VTR8100,When the device is working, do not unplug the
•
external card directly, or it may damage files or cause a
malfunction.
When the battery indicator symbol "
•
please charge the device promptly or replace the battery,
less than 3 minutes recording time are left.
" is displayed,