Get Started; Connect Power - Philips PNS400 User Manual

3 Get started

Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Connect power

The navigator has a built-in battery that can be
charged through the USB socket of a computer,
or the vehicle power adapter.
Charge through USB socket
Note
•
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Turn off the navigator and connect the supplied
USB cable to:
• The MINI USB socket of the navigator.
• The USB socket of the computer.
Charge through car adapter
Use the supplied car adapter to connect to:
• The MINI USB socket of the navigator
• The cigarette lighter socket of a car
EN
7