Huawei SmartLogger1000 Quick Manual page 2

2. Remove the 4G router under the SmartLogger1000 and label the cables.
3. Remove cables connected to the SmartLogger1000 and label them.
4. Remove the four screws from the SmartLogger1000 rear panel and remove the
SmartLogger1000.
5. Install the screws to be used for securing the SmartLogger3000 to the spare bottom plate.
Use the screws delivered with the SmartLogger3000. Do not fully tighten the screws to
facilitate the installation of the SmartLogger3000.
6. Install the spare bottom plate in the combiner box.
7. Mount the SmartLogger3000 to the spare board using mounting ears and tighten the screws.
8. Connect the PE cable to the SmartLogger3000.
Use the spare
PE cable of the
SmartLogger3
000.
2