Huawei SmartLogger1000 Quick Manual page 8

4
Parameter Settings in Management Systems
Scenario 1 : Huawei Hosting Cloud
The SmartLogger3000 automatically connects to the hosting cloud. Log in to the Huawei hosting
cloud, choose Device Management, and verify that the SmartLogger3000 has been connected
properly. No manual replacement is required.
Scenario 2 : NetEco 1000S
1. Choose Maintenance > Device access, and add the SmartLogger3000 to the PV plant where
the SmartLogger1000 is located.
2. Set the communication parameter Connect of the SmartLogger1000 to Disable.
3. Replace the SmartLogger1000.
Scenario 3: FusionSolar Smart PV Management System
1. Log in to the FusionSolar smart PV management system and click
digitalization page is displayed. In the lower right corner of the page, check that the
SmartLogger3000 is properly connected in the Device Self-Discovering area.
2. Right-click the SmartLogger1000 diagram element, click Fast Replace, and enter the SN
of the SmartLogger3000.
Scenario 4: Third-Party Management System
Replace the SmartLogger1000 with the SmartLogger3000 based on the guide of the third-party
management system.
Scenario 5: Master/Slave SmartLogger
When the SmartLogger3000 replaces the slave SmartLogger1000, choose Maintenance >
Connect Device on the master SmartLogger WebUI, and click Remove Devices to delete the
SmartLogger1000. Click Add Devices to add the SmartLogger3000.
8
, the plant
Huawei Technologies Co., Ltd.
Huawei Industrial Base, Bantian, Longgang
Shenzhen 518129 People's Republic of China
www.huawei.com