Disassembly And Assembly Instructions - Panasonic EH-HV10 Service Manual

4. Disassembly and Assembly Instructions

4.1 Disassembly Instructions
1. Insert a small flat head screw driver
into the groove of the Shaft Cover
as shown in Figure 4.
Shaft Cover
groove of Shaft Cover
groove of Shaft Cover
2. Remove the Shaft screw and take off the Shaft
from Main body as shown in Figure 5.
Shaft screw
(Figure 4)
Shaft
(Figure 5)
3. Remove the spring by pull out the Housing side
and Press plate side as shown in Figure 6.
Pull
Spring
4. Using a screw driver remove the two tapping screw
from Press plate cover as shown in Figure 7.
※Be careful not to lose the spring ※.
Spring
5.Take off the Press plate cover as shown in Figure 8.
Pull
(Figure 6)
Tapping Screw
(Figure 7)
Press plate Cover
(Figure 8)