Mem Card Installation; Installing The Mem Card - NEC DECT G355 Administrator's Manual

Bluetooth module installation

MEM card installation

The G355, G955 and I755 DECT Handsets can be equipped with
a removable memory (MEM) card used to store configuration and
user data on. The MEM card allows for:
1. Storage of more data than in just the handset's memory;
2. Transfer the configuration and user data from one handset
to another (e.g., in case a handset becomes defective).
When an empty MEM card is inserted, the configuration of the
handset is copied to the MEM card. Note that the DECT
subscriptions of the handset are also moved to the MEM card.
When you therefore remove the MEM card from the handset you
won't be able to make or receive calls with your handset.
When inserting a MEM card with the configuration of some other
G355, G955 or I755 DECT Handset then that configuration will
be used.
Any configuration changes or new contacts, messages, calendar
items and call filter items added after installing a MEM card are
stored on the MEM card and not in the handset memory.
The MEM card tray is under the battery pack on the back of the
handset. Therefore before you can install or remove the MEM
card the battery pack has to be removed from the handset.
Reinstall the battery pack after you have installed or removed the
MEM card.
Note: To install a new MEM card into the handset, you must
extract it from the frame it comes in.

Installing the MEM card

To install the MEM card in the handset, perform the following
steps:
1. Place the handset facedown on a flat surface.
12