Dect System Configuration; Subscribing The Handset To A Dect System - NEC DECT G355 Administrator's Manual

DECT system configuration

DECT system configuration

Subscribing the handset to a DECT system

The handset has to be subscribed to at least one DECT system
before it can be used to make a call. The handset can operate with
a maximum of four (with a MEM card: eight) DECT systems, for
which the handset stores the name of the system in a subscription
record. The subscribed name appears on the handset display
whenever the handset enters the range of the DECT system.
To subscribe to a DECT system you need the following
information:
1. PARK code: A unique identifier of the DECT system.
Use a PARK code during the subscription procedure only
if more than one DECT system overlaps in your location.
2. DECT system name: The name of the system to which
the handset is subscribed.
3. Phone number: The local phone number of the DECT
handset.
1.
2.
3.
4.
5.
6.
7.
8.
18
 New/additional subscription
 Overwrite subscription