Cleaning; Storage During Non-Use; Troubleshooting - Silvercrest SBL TW10 A1 Operation And Safety Notes

˜ Cleaning
Switch the product off and remove all cables before cleaning .
Only clean the outside of the product using a soft, dry cloth!
Do not use solvent-based cleaning agents, abrasives, harsh cleaning
solutions or hard brushes for cleaning .
˜ Storage during non use
Store the product in a dry environment when not in use . Protect it from
dust and direct sunlight . The rechargeable battery needs to be charged
regularly .
˜ Troubleshooting
= Fault
= Possible cause
= Action
= No functions
= Battery drained .
= Recharge the battery as described in the "Charging" section of these
instructions .
No Bluetooth® connection
Error operating the product .
If necessary, unplug the AUX cable 13 from the AUX-in jack 1 .
Switch the product off and on again and increase the volume .
Playback device error .
Check to see if the product was detected by the playback device .
Disconnect the playback device and pair the speakers with your playback
device again .
US-EN 19