SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Figure 1-35 Cable holes at the bottom of the cabinet (top view)
NOTE
1.2.6 ESD Jack
The ESD wrist strap is used to prevent the electrostatic discharge from damaging the equipment.
One end of the ESD wrist strap should be connected to the ESD jack on the cabinet.
Wear an ESD wrist strap when installing the N66E-18 cabinet. Insert one end of the ESD wrist
strap into the ESD jack in the middle of the mounting angle, as shown in
Issue 08 (2013-12-18)
The unit for figures in this topic is mm, unless otherwise stated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Cabinet
Figure
1-36.
46