Dimensions; Installation Precautions - Panasonic CZ-64ESMC3 Installation Instructions Manual

System controller

Hide thumbs Also See for CZ-64ESMC3:

Table of Contents

Dimensions

System Controller

Switch Box

Installation location

Avoid the following locations for installation.

• Under direct sunlight

• Locations where the controller will be splashed with water or affected by

dampness or humidity

• Location that is subject to excessive vibration or physical impacts. (Fixing screws

may come off, and the controller may drop.)

Install the controller away from any sources of electrical noise.

Install the controller to the locations where is suitable to the temperature for using or

environment.

When installing more than 1 controller next to each other, keep distance of 5 mm or

more on the right and left and 50 mm or more on top and bottom.

General precautions on wiring

Regulations on wire diameters differ from locality to locality. For ﬁ eld wiring rules,

please refer to your LOCAL ELECTRICAL CODES before beginning.

You must ensure that installation complies with all relevant rules and regulations.

Use the ﬁ eld supplied wiring with at least 1 mm in thickness of insulation part

including the sheath.

Connect all wiring tightly to prevent the terminal board from loosening when the wiring

connection part is pulled by an external force. (Otherwise, ﬁ re or overheating may occur.)

Do not bury the inter-unit control wiring in the ground.

Do not store the power supply wiring and other wiring in the same metal tube or

bundle them together. (An operational error or noise may occur.)

(EN)

• Location near heat source

• Uneven surface

Table of Contents