7 Simulation of the Controlled System
Simulation of the "LOGO! TD"
7.4
In the screen "LOGO! TD Text display", the display of the LOGO! TD is
reproduced. The setpoint pressure (SP), the actual pressure (PV) and the
revolutions of the pump are displayed as absolute values.
Figure 7-4
The operation of the simulated LOGO! TD is identical to the operation as described
in sections:
6.3 Scenario 2: Changing the language and switching the backlight on/off via
LOGO! TD (2, 3),
6.5 Scenario 4: Change setpoint by means of LOGO! TD (1, 4)
The cursor keys (arrow keys) cannot be used.
Table 7-5
Field
F1
Click on the F1 button (in the KTP) to navigate
to the "regulation" screen.
F6
Click on the F6 button (in the KTP) to navigate
to the screen "LOGO! TD Text display".
Set23_RegSim
Entry ID: 23753479,
V2.3.S,
Action
02/2014
Comments
37