Tandem Operation; Speed Limits For Converter Operation - Siemens SIMOTICS XP Operating Instructions Manual

Preparations for use
4.14 Converter operation
4.14.5

Tandem operation

If you connect two motors in series in "tandem operation", locate a coupling between the
motors; this coupling should satisfy the Directive 2014/34/EU or the regulations that apply in
the country where the equipment is installed.
4.14.6

Speed limits for converter operation

Observe the information on the rating plate regarding the speed limits for converter
operation.
See also
Parameterizing the converter (Page 46)
50
1MB..5/6 shaft height 71 ... 355
Operating Instructions, 10/2021, A5E41926185A