Advertisement
Installing the Transducer
1. Remove the hose from the fitting on the rear control weldment (Box A of
2. Remove and save the fitting from the rear control weldment (Box B of
3. Install the tee fitting on the rear control weldment (Box C of
N∙m (222 to 248 ft-lb). .
4. Install the hose onto the tee fitting (Box D of
5. Install the fitting (Box A of
Torque the fitting to 301 to 336 N∙m (222 to 248 ft-lb).
6. Install the reducer and O-rings (Box B of
7. Install the transducer assembly (Box C of
Transducer (page
Figure
5) that was removed in step
Figure
2).
Figure 3
Figure 4
Figure
Figure
4).
2
(shown in Box B of
Figure 5
5); torque the reducer to 301 to 336 N∙m (222 to 248 ft-lb). .
Figure
5) that was removed in step
3
Figure
4).
Figure
4).
4); torque the fitting to 301 to 336
Figure
3
of
Disconnecting the
g215620
g215621
4).
g213032
Advertisement
