Advertisement
* Tightening torque is 1.5Kgf ⋅ cm ± 7%
2 Key bottom cabinet removal
1. Remove eight screws 1 and remove key bottom cabinet 2 .
1
2
Indicator filter
[Note for assembly]
1. Microphone attachment
1) Insert the connector until it is locked. (Be careful of inserting direc-
tion and bending.)
2) Insert the microphone body into the cabinet. (Be careful of the
inserting direction.)
3) Treat the wire not to cover the upper side of recording/indicator
button and screw hole A .
2. Speaker lead wire process
1
Microphone
3. Key lower cabinet screw tightening
A
1) Tighten six screws ← A .
2) Tighten two screws ← B .
A
Microphone cone side
– 41 –
Keep the lead wire away from the parts.
A
B
A
* Tightening torque: 1.6kgf ⋅ cm ± 7%
* Tightening torque: 0.6kgf ⋅ cm ± 7%
A
A
B
A
Advertisement
