8.11. Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding props (×3
4. Remove the screws (×3
Board.
).
, ×3
) and remove the SU-
8.12. Remove the SD-Board
1. Remove the Control button unit. (See section 8.9.)
2. Remove the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
3. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
4. Remove the molding props (×3
5. Remove the screws (×3
Board.
23
).
, ×3
) and remove the SD-