Leak Detector Tank Kit
Greensmaster
Model No. 136-8545
This product contains a chemical or chemicals known to the State of California
Installation
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
4.
Disconnect the battery; refer to your machine
Operator's Manual.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
3300 TriFlex
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
®
Traction Unit
WARNING
CALIFORNIA
2
Removing the Leak
Detector Tank
No Parts Required
Procedure
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury.
• Make sure that all hydraulic fluid hoses
and lines are in good condition and all
hydraulic connections and fittings are tight
before applying pressure to the hydraulic
system.
• Keep your body and hands away from
pinhole leaks or nozzles that eject
high-pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks.
• Safely relieve all pressure in the hydraulic
system before performing any work on the
hydraulic system.
• Seek immediate medical attention if fluid
is injected into skin.
Form No. 3417-206 Rev A
Installation Instructions
Original Instructions (EN)
All Rights Reserved *3417-206* A
Printed in the USA