Table of Contents
Advertisement
3
Installation > Points to Note About Installation > Handling the Options with VOID Seal
Points to Note About Installation
Before Installation
Enable iR-ADV Security Kit-B1 for IEEE 2600.1 Common Criteria Certification after
installation of the options which is a prerequisite has been completed.
Important
When obtaining IEEE2600.1CC certification, the firmware of the host machine is also
a prerequisite for obtaining it. When the firmware is changed to the one usually used
in the host machine by the field remedy, the machine is excluded from IEEE2600.1 CC
certification. To maintain the status of IEEE2600.1CC certification, install the firmware
for the host machine from the CD included in the package of iR-ADV Security Kit-B1 for
IEEE 2600.1 Common Criteria Certification.
3
Installation > Points to Note About Installation > Handling the Options with VOID Seal
Handling the Options with VOID Seal
LMS options are sealed by the VOID seal (seal to prevent falsification). Check that they
are sealed before opening. If opened, do not use them because of concern about changed
contents.
Important
Check the VOID seal with the user.
The options targeted for VOID seal in the IEEE2600.1 CC certification configuration are as
follows.
• iR-ADV Security Kit-B1 for IEEE 2600.1 Common Criteria
• Access Management System Kit-B
• HDD Data Encryption & Mirroring Kit-C
• Data Erase Kit-C
3-2
F-3-1
3-2
Advertisement
Table of Contents
