Checking Before Installation; Checking The Installation Space; Check Items When Turning Off The Main Power; Points To Note At Installation - Canon Inner Finisher-K1 Service Manual

Checking Before Installation

Checking the Installation Space

Requirements for the installation place are given below.

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1. Turn OFF the main power switch of the Host Machine.
2. Be sure that control panel display and main power lamp are both turned OFF, and then disconnect the power plug from the
outlet.

Points to Note at Installation

• Marked portion
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
100mm or more
500mm or more
92
7. Installation