Checking Before Installation; Checking The Installation Space; Points To Note On Installation - Canon POD Deck Lite-C1 Service Manual

Checking before Installation

Requirements for the installation place are shown below. It is recommended to look over the installation place before delivering
the equipment to the user.
CAUTION:
• Install the host machine first and then install the POD Deck Lite.
• Do not carry the POD Deck Lite with the host machine installed for breakage prevention.

Checking the Installation Space

The minimum space shown in the figure is required for installation and maintenance.

Points to Note on Installation

Exercise following caution for installation.
1. POD Deck Lite weighs maximum 67 kg. When holding the POD Deck Lite at the installation, be sure to perform the work in
accordance with the standard to handle a heavy load in each country. In addition, be sure to keep the machine leveled when
lifting it.
2. The cassette heater switch is indicated by the heater symbol.
1106mm
Cassette Heater Switch
102
800mm or more
800mm or more
500mm or more
Heater Symbol
6. Installation