Advertisement
6. CARE, CLEANING AND STORAGE
6.1 To Clean the appliance
WARNING!
Before cleaning the unit, make sure to
disconnect the unit from power
supply.
1. Clean the Filter lid and Case
• The plastic surface of the appliance
may be cleaned with an oil-free dry
cloth or a vacuum cleaner equipped
with a soft brush.
• Use the slightly damp cloth. Do not
use bleach or abrasives.
• Do not splash water directly onto the
unit. Doing so may cause electric
shock, insulation failure, or rusting.
• The air intake grille and outlet get
soiled easily, so cleaning such parts
with a vacuum cleaner is
recommended.
2. Clean the Water Tank
Every 4-6 weeks, clean the water tank
to prevent growth of mold, mildew and
bacteria.
a. Pull out the water tank from the unit.
b. Take off the handle following the
steps as shown in below image.
1
2
3
c. Open the cover lid of the water tank.
d. Partially fill the water tank with clean
water and add a little mild detergent.
Swish it around, then empty and
rinse the water tank.
e. Reinstall the cover lid, handle and
put the water tank back into the unit.
NOTE:
• Do not use a dishwasher to clean the
water tank. After cleaning, the water
tank must be put back in place so the
appliance will operate properly.
3. Clean the Mesh Pre-filter
The mesh pre-filter is put together with
the filter lid at the back of the appliance,
it should be checked and cleaned at
least every 30 days or more often if
necessary.
NOTE: DO NOT PUT THE FILTER IN
A DISHWASHER.
a. Open the filter lid and you will find
the mesh pre-filter is put behind the
back of the lid.
ENGLISH
13
Advertisement
