Panasonic 3000 Operating Instructions Manual page 120

PRINTOUT JOURNALS AND LISTS
Journals and Lists
Explanation of contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result
(5) Number of pages transmitted or
received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
120
: "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"P-OK" indicates that memory overflow occurred while storing the documents
into memory for transmission but successfully stored document(s) was sent.
"R-OK" indicates that the Relayed XMT was successful.
"- -" indicates LAN transmission.
"3-digit Info Code" (See page 129) indicates that the communication has failed.
: The 3-digit number is the number of pages successfully transmitted or received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted. Asterisk "*" indicates that the quality of
some received copies was poor.
: 001 to 999 (If the communication is stored into memory, a file number is
assigned for each communication.)
: "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"FWD" means Fax Forward
: Name : Recorded name in the Phone Book or remote station's Character ID.
¤
number : Dialed telephone number (PIN code will not be shown)
Number : Remote station's ID number.
Email address
: For service personnel only
: Up to 25 characters
: Up to 20 digits
: Up to 16 characters