Table of Contents
Advertisement
BASIC OPERATIONS
Receiving Documents via LAN
Retrieving Email from a POP Server
The DP-2500/3000 offers a choice to retrieve and print Internet email messages via LAN unattended or manually
when subscribing to a POP mail server.
Setting the POP Parameters
Set the parameters pertinent to the POP server (Fax Parameters Nos. 146 to 149).
No. 146 (POP TIMER): Enter the interval to check and retrieve email from the POP server (0 to 60 minutes).
If "0 minutes" is entered, the POP server is not checked for mail.
No. 147 (AUTO POP RCV): When there is mail to be retrieved from the POP server, the DP-2500/3000 will
retrieve it and print the email unattended. If this parameter is set to "1:Invalid", the machine will not retrieve it,
but displays the number of mails on the POP server.
No. 148 (DEL POP RCV EMAIL): Select whether the email is deleted from the POP server after it is retrieved
by the DP-2500/3000.
No. 149 (DEL POP ERR EMAIL): Select whether to delete the email from the POP server when the file
attachment format is not supported.
To set the above POP parameters, follow the steps below.
Make sure that the INTERNET lamp is ON. If not, press
1
2
SET MODE
74
04 FAX PARAMETERS
to select the "INTERNET MODE".
SELECT A FUNCTION
DEFERRED COMM.
ADVANCED COMM.
EDIT FILE MODE
SET MODE
FAX PARAMETERS
SELECT A FUNCTION
001 CONTRAST (HOME)
002 RESOLUTION (HOME)
003 ORIGINAL (HOME)
004 STAMP (HOME)
005 MEMORY (HOME)
CANCEL
01/33
POLLING
SELECT MODE
PRINT OUT
EDIT PHONE BOOK
O K
Advertisement
Table of Contents
