Storing System Logs On The Flash-Memory Pc Card; Disabling Flash-Memory Pc Cards - Nokia IP1220 Installation Manual

7
Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated Data Path
To remove a PC card in an IP1200 Series appliance
1. Perform a system shutdown by using Network Voyager or the CLI halt command.
2. Press the eject button to remove the PC card.
Caution
To prevent the card from ejecting too quickly, hold the PC card while you push the eject
button.
3. Reboot the appliance.

Storing System Logs on the Flash-Memory PC Card

You can use the flash-memory PC card to store system log messages. Use Nokia Network
Voyager to configure the flash-memory PC card as an optional disk. After you reboot the Nokia
IP1200 Series appliance, use Network Voyager to configure system logging options. For more
information, see the Nokia Network Voyager Reference Guide for the version of Nokia IPSO you
are using.

Disabling Flash-Memory PC Cards

If you configure the flash-memory PC card as an optional disk, you must disable the card before
you remove it. You can disable the card by using Network Voyager or the CLI.
To use Nokia Network Voyager to disable a flash-memory PC card
1. Click System Logging under System Configuration and check the Unselect check box.
2. Click Apply.
3. Click Up.
4. Click Optional Disks under System Configuration and click the Off radio button under Local
Logging.
5. Click Apply.
6. Click Save.
7. Click Up.
8. Click Reboot, Shut Down System to shut down or reboot the appliance.
You can now remove the flash-memory PC card.
To use the CLI to disable a flash-memory PC card
1. Enter the following command:
set syslog local-log off
94
All manuals and user guides at all-guides.com
IP1220 and IP1260 Security Platforms Installation Guide