Location And Function Of Parts; Front - Sony PCSA-CHG90 Operating Instructions Manual

Location and
Function of Parts

Front

1
2 3 4 5
a Lens
This is a 12-magnification optical zoom
lens.
b SONY and HD nameplates
Pull them out to turn them over and
attach upside down if necessary.
c POWER lamp
Lights in green when the Camera Unit is
connected to an AC outlet using the
supplied AC power adaptor and AC
power cord.
d STANDBY lamp
Lights in orange when the connected
PCS-PHG90 Communication Terminal
is set to standby mode or is turned off.
e ND filter select switch (bottom of
the camera block)
Switches the setting of the built-in ND
filter according to the brightness of the
subject to be shot.
Setting of the ND Filter
Switch Function
position
OFF Disables the ND filter
ND1 Uses the ND filter to reduce
the output luminance level
to approximately one sixth
ND2 Uses the ND filter to reduce
the output luminance level
to approximately 1/32

Location and Function of Parts

ND filter select
switch
11
GB