Table of Contents
Advertisement
4
1. Overview
Location and Function of Parts
Operator Switch Side
28
27
AF
ND STEP
26
ND ON
CLEAR
25
1
24
23
22
3
21
1.
FOCUS switch (page 88)
2.
LOCK switch
Locks the operation of the buttons.
When locked, the switch background LED
lights in orange.
3.
ND VARIABLE dial (page 95)
4.
Built-in speaker (page 71)
5.
Air inlet
[Note]
Do not cover the air inlet.
6.
MENU button (page 28, 33)
Press the MENU button to display the status
screen. Press and hold the MENU button to
display the full menu screen.
CFexpress Type B card
slot section (page 5)
1
2
3
4
5
6
7
8
9
10
LOCK
CLIPS
MF
A
ND VARIABLE
2
DISP
CH-1
FULL MENU
AUTO
MENU
B
CH-2
AUTO
BACK
SLOT
SEL
REC
SD
20
19
18
17
15
14
16
Press the button during status screen or full
menu screen display to return to the previous
screen display.
7.
CH1/CH2 (AUTO/MAN) switches
(page 98)
8.
Wi-Fi antenna
[Note]
Wi-Fi communication may be interrupted if you cover
this part with your hand or a metallic object.
9.
AUDIO LEVEL (CH1/CH2) dials (page 98)
10.
CLIPS button (page 68)
Press to display the clips on the active
playback media on the clips screen and to
enable playback operation. Press when the
clips screen is displayed to return to the
shooting screen.
11.
Access indicators A/B (page 18)
12.
SLOT SELECT (CFexpress Type B memory
card select) button (page 71)
13.
Headphones connector (stereo mini jack)
Connect to earphones for audio monitoring.
You can monitor the input audio during
shooting/recording and playback sound
during playback (page 71).
14.
Utility SD card slot/Access indicator
11
(page 20)
15.
Internal microphone (page 98)
Narration microphone for recording ambient
sound.
16.
BACK button
Cancels the menu setting and moves up one
12
level in the menu hierarchy during menu
display. Cancels the execution process or
13
pending process during process execution/
pending display.
17.
Power switch
Set to the (ON) position to turn the power
on. Set to the (Standby) position to turn the
power off.
[Notes]
• This unit uses a small amount of standby power even
when the power is switched off. Remove the battery
pack if the unit will not be used for a prolonged
period.
• When removing the battery pack or the DC IN power,
set the power switch to the STANDBY position and
check that the power lamp is not lit. Disconnecting
with the power switch in the ON position could cause
a malfunction of the unit or the memory cards.
18.
Power lamp (page 82)
19.
REC ACTIVE lamp
The lamp is lit green when the REC button is
enabled.
20.
REC (recording start/stop) button/lamp
Press to start recording, turning the REC lamp
on. Press again to stop recording, turning the
REC lamp off (page 82).
21.
ASSIGN (assignable) lamp 3 (page 100)
The lamp is lit orange when the assigned
function is on (enabled) or activated, and not
lit when the function is off (disabled).
22.
Multi-function dial (page 100)
Press when viewing the image in the
viewfinder to display and operate the direct
menu.
Turn the dial when a menu is displayed in the
viewfinder to move the cursor up/down to
select menu items or settings. Press to apply
the selected item.
When the menu is not being displayed, the
dial can also function as an assignable dial.
[Tip]
By default, you can use the dial to adjust the iris when
an E-mount lens is attached.
23.
Multi selector (8-way D-pad and apply
buttons)
Use to select a subject recognition frame
during auto focus, move the focus area, and
move the magnification position during focus
magnifier operation. It can also be used for
menu operations when the LCD monitor is in
video monitoring mode (page 21).
[Tip]
The multi selector of the grip remote control (option)
and LANC remote control (option) function in an
equivalent manner to this multi-selector.
24.
DISPLAY (screen display) button
(page 22)
25.
ASSIGN (assignable) buttons/lamps 1/2
(page 100)
The lamp is lit orange when the assigned
function is on (enabled) or activated, and not
lit when the function is off (disabled).
26.
ND FILTER POSITION up/down buttons/
ND CLEAR lamp (page 95)
When the ND filter is set to CLEAR, the ND
CLEAR lamp turns on.
Advertisement
Table of Contents
