Troubleshooting - Silvercrest SPBL 8000 A2 Operation And Safety Notes

Troubleshooting

= Problem
= Cause
= Solution
The power bank
It may be that the power bank is not connected
properly.
Check that it is connected.
In order to charge the power bank, a power
supply with 5 V and at least 2 A has to be used.
A connected device is not being
charged.
The battery is drained.
Charge the battery.
The device is not connected.
Check that it is connected. Lightly press the
ON / OFF switch
process.
The current consumption of the connected device
might be too low.
84 GB/MT
is not being charged.
5
to begin the charging
1