Operation And Use; Charging The Power Bank - Silvercrest SPBL 8000 A2 Operation And Safety Notes

WARNING! During charging process,
please be noticed that the product must not be
covered. There is a risk of warming and over-
heating.

Operation and use

Charging the power bank

The built-in rechargeable battery must be fully
charged before using the product.
To charge the power bank
supplies with an output voltage of 5 V and an
output current of at least 2 A.
Connect the USB cable
Input
4
Connect the other end of the USB cable
(USB Type A) to a USB power supply (not in-
cluded in the scope of delivery) (see fig. B).
The current battery status is shown by LED indi-
cator
2
the charging process. When the power bank is
fully charged, all 4 LED lights will be illuminated.
The required charging time for the power bank
depends on the charging source and its output
of the power bank
and LED light will flash white during
only use power
5
with the Micro USB
6
.
5
GB/MT
6
81