Panasonic ASQ1 Series Quick Start Manual

For detection: Seal Type Switches
Turquoise Stroke Switches
Long Stroke and Sliding Contact Construction Sealed Switches
13.3
10.1
ORDERING INFORMATION (PART NO.)
Size of mounting hole Terminal
2: Wire leads right side type
0: Mounting hole 3 mm
standard type (SPST-NC and SPST-NO only)
1: Mounting hole 3 mm
without boss type
4: Right side pin type
4: Solder
(solder terminal only)
5: Left side pin type
(solder terminal only)
6: Right 2 boss type
(solder terminal only)
7: Left 2 boss type
7: P/C board right angle
(solder terminal only)
Note) Not every combination is available. Please refer to the following table, "PRODUCT TYPES" .
2021.10
industrial.panasonic.com/ac/e/
5.4
(Unit ： mm)
ASQ1
3: Wire leads left side type
(SPST-NC and SPST-NO only)
5: P/C board 6: Wire leads
terminal bottom type
terminal
8: P/C board left angle
terminal terminal
FEATURES
Long stroke: over travel (OT) is 2.2 mm or more on
the NO side and 2.5 mm or more on the NC side (for
pin plunger type)
Constructed so that the contact force does not
depend on the operation stroke.
High contact reliability to support low level switching
loads.
Highly effective sealing for resistance against
adverse environments
Silent operation with sliding contact
TYPICAL APPLICATIONS
Automobiles (detection of door opening and closing
and shift lever position, etc.)
Electric tool and household appliances (vacuum
cleaners, air conditioners, washing machines, etc.
Contact form
1: SPDT 2: SPST-NC
(wire lead type only)
COM N.O. N.C. COM
ー 1 ー Panasonic Corporation 2021
Actuator
3: SPST-NO
0: Pin plunger
(wire lead type only)
7: Leaf lever
8: Simulated
leaf lever
N.C. COM N.O.
AECTB6E 202110