Advertisement
12.
CALIBRATION
We suggest the unit is periodically checked for calibration in situ. If the unit is covered by a service agreement with the MOT package installer,
they will carry this out on your behalf. Should you wish to regularly check the calibration yourself, we recommend you purchase an Alignment
Device from your local dealer. Full instructions are provided with the re-calibration tool.
13.
OTHER INFORMATION
The Headlamp Beam Tester (Floor Mounted version only) is equipped with a spirit level located on the base of the optical box which is visible
through the transparent panel by turning on the vehicle head lights. To level the box, open the clutch lever located on the side of the box
and move the box until the spirit level registers correctly. Re-tighten the clutch lever “L”. The box level must be checked every time it is used
on a different working surface.
14.
CARE OF THE BEAM TESTER
14. 1. The paint work is detergent resistant. Clean with a damp cloth, removing any stains. A small amount of alcohol may be applied
to stubborn areas of grime.
14. 2. DO NOT leave the machine in areas where corrosive vapour is present, i.e. Battery charging or painting shops etc.
14 .3. DO NOT oil the column.
14 .4. An optical box dust cover is available upon request.
15.
PARTS LIST
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required
for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
01284 757500
Origin Date: 011297
Issue Date: 011297
Version No: 1
Modified Date: 071098
Sealey Group,
Bury St. Edmunds,
Suffolk.
01284 703534
ITEM
PART NO
DESCRIPTION
1A
TC024010004
Wheel for rails
1B
TC024010005
Wheel for rails
2
TC024010001
Base rail
3
TC025010003
Case for column
4
TC020010045
Front wheel shaft
5
TC025010002
Turning column
6
TC025010004
Spring for vettical sliding system
7
TC024010002
Optical box
8
TC025030011
Black handle
9
TC025030014
Glass Ø200mm
10
TC025030013
Lens stand
11
TC027010037
inner panel
15
TC020010038
Spirit level
16
TC025020009
Brake spring
17
TC021010006
Coloured luxmeter
18
TC020010028
Steel cover
20
TC020020018
Electronic card wqith photodiode
21
TCNR5020033
Stopper 22x30mm
22
TC020010050
Plexiglass cover
23
TC025020005
Vertical sliding system (VSS)
24
TC025020007
Spring pusher
26
TC025020008
Stopper
27
TC025020006
Brakr got VSS
30
TC025020011
Mirror visor
35
TCNA2010037
Screw M8x110mm
36
TCNR5020008
Wheel handle Ø35mm
38
TC020010047
Wheel axle 15x45mm
39
TC022040010
Brake pedal
40
TC022040006
Brake pivot thread
61
TC025020010
Lower closing
64
TC025010068
Washer
65
TCND1010002
Bearing B/6005-RS
68
TC025010122
Plate for mirror visor
69
TC025010121
Compass for mirror visor
70
TC025010123
PVC Washer
72
TC025010119
OT Washer
73
TCNA1010034
Screw M10x80mm
74
TCNA2010011
Screw M8x60mm
75
TC021010023
Frame for luxmeter
76
TCNA0010009
Screw M6x16mm
77
TCNA1010034
Screw M4x16mm
78
TCNB1010006
Nut M8
79
TCNA0010026
Screw M8x20mm
80
TCNA0010005
Screw M6x50mm
81
TC020010037
Spring for spirit level
82
TCNB0010005
Nut M8
83
TCNA4010006
Screw 3.9x9.5mm
84
TC025020059
Rail kit complete
E-mail: sales@sealey.co.uk
HBS97HBS971- 010798
Advertisement
