8M-B120C Dismantle Instruction 1. Scope This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU. 2. Tools for dismantling Below tools are required to dismantle this product. Screw Driver Nipper 3. Dismantle Procedure This product can be dismantled by below steps.
8M-B120C Dismantle Instruction 4. Batteries This model uses only AAA battery for remote control. Battery can easily be removed. 5. Back covers 3 back covers (right/center/left) can be removed by screw driver.
8M-B120C Dismantle Instruction 6. Printed circuit boards All PWBs can be removed by screw driver. Main PWB (1pcs) Power PWB (4pcs) Back end PWB(1pcs) Backlight Power Control PWB (1pcs) Main T-CON PWB (1pcs) Sub T-CON PWB (8pcs) LED Driver PWB (4pcs)
8M-B120C Dismantle Instruction 8. Capacitors Electrolyte Capacitors which diameter/height is larger than 25mm is installed on the Power PWB. These capacitors can be removed by using nipper to cut the leads. 9. Parts List Parts described in Annex VII of directive 2012/19/EU are as below.