Selecting The Economy Mode; Monitor Out/Rs-232C Off Function; Automatic Power Shutoff Function - Sharp XG-V10XU Operation Manual

Selecting the Economy Mode

Projector
(GUI) On-screen Display
On-screen Display
(GUI) On-screen Display
E-55
Remote Control
1, 5
2, 3, 4
1.2.3 4.5.6
These functions allow you to reduce the power
consumption when the projector is in standby mode.

Monitor Out/RS-232C Off Function

This projector consumes power when using a monitor
connected to the OUTPUT port for INPUT 1, 2 and a
computer connected to the RS-232C port. When not
using these ports, "MNTR Out/RS232C" can be set to
" " to reduce standby power consumption.
Description of Monitor Out/RS-232C Off
Standby power for Monitor Out/RS-232C connection
turned off.
Monitor Out/RS-232C on
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (1)".
3 Press ∂/ƒ to select "MNTR Out/RS232C".
4 Press ß/© to select "
5 To exit from the GUI, press MENU.
CAUTION
• Set "MNTR Out/RS232C" to "
Advanced Presentation Software (supplied).

Automatic Power Shutoff Function

When no input signal is detected for more than 15
minutes, the projector will automatically shut off. The
on-screen message on the left will appear five minutes
before the power is automatically turned off.
Description of Automatic Power Shutoff
Power automatically shuts off after 15 minutes of no
signal input.
Automatic Power Shutoff disabled.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (1)".
3 Press ∂/ƒ to select "Auto Power Off".
4 Press ß/© to select "
5 To exit from the GUI, press MENU.
• "MNTR Out/RS232C" is factory preset to "
Power Off" is factory preset to "
MOUSE ADJ.
" or " ".
" when using the Sharp
MOUSE ADJ.
" or " ".
", and "Auto
".