Manual Station Selection; Automatic Station Search - Silvercrest KH 2299 Operating Manual

Switching the radio on and off
1. To switch the radio function on, press the button ON/
AOT/OFF 2!. In the display r the currently selected
frequency is shown.
2. Press the button ON/AOT/OFF 2! once again to switch
the radio off and return the appliance to the automatic
modus.
Note:
By pressing and holding the button ON/AOT/OFF
2! you switch to the function switch-off time (see S. 15
chapter AOT Switch-off timer).

Manual station selection

1. Using the button USER/BAND h, select the required
radio frequency: MW (AM) or VHF (FM).
2. Briefly press the button UP
stations with a higher frequency than the one shown in
the display r.
3. Briefly press the button DOWN
for stations with a lower frequency than the one shown in
the display r.
4. Should the currently selected radio station transmit RDS
data, the
Then the display r shows the name of the radio station,
and the time is updated (if activated in the settings, see
section "Setting Update function").

Automatic station search

You can have the kitchen radio search for stations.
The kitchen radio searches the frequency range until it finds
a station.
1. Press and hold the button UP
kitchen radio searches for the station with the next highest
frequency.
2. Press and hold the button DOWN
the kitchen radio searches for the station with the next
lowest frequency.
Repeat these steps until you have found a radio station to
your liking.
Save and recall a radio station manually
As the appliance can be used by numerous people, it is fitted
with user switching, A/B. Both users can save different radio
stations. To switch between users, press and hold the button
USER/BAND h for two seconds.
1( repeatedly to search for


-indicator lights-up in the display r.
1( for two seconds: the

- 13 -
l repeatedly to search
l for two seconds:
