Toro Sand Pro 3040 Operator's Manual page 4

4
Installing the Lift Tube to the
Lift Arm
Parts needed for this procedure:
2 Bolt (3/8 x 3 inches)
4 Washer
2 Flange nut (3/8 inch)
Procedure
Secure the lift tube to the lift arm as shown in
1. Bolt (2)
2. Washer (4)
Figure
Figure 7
3. Lift tube
4. Nut (2)
5
Installing the Rake Assembly
to the Hitch Tube
Parts needed for this procedure:
1 Bolt (1/2 x 1-3/4 inches)
1
Flange-head bolt (3/8 x 1 inch)
1 Flange nut (3/8 inch)
1 Flange nut (1/2 inch)
1 Locknut (1/2 inch)
7.
Procedure
1. Align the 2 holes in the bracket in the center of the rake
assembly with the 2 holes in the hitch tube
1. Flange-head bolt (3/8 x 1
inch)
2. Bolt (1/2 x 1-3/4 inches)
3. Hitch tube
2. Secure the rake assembly to the hitch tube with a bolt
(1/2 x 1-3/4 inches), a flange nut (1/2 inch), a locknut
(1/2 inch), a flange-head bolt (3/8 x 1 inch), and a
flange nut (3/8 inch).
4
(Figure
Figure 8
4. Flange nut (1/2 inch)
5. Locknut (1/2 inch)
6. Flange nut (3/8 inch)
8).