Philips HR1613 Manual page 8

ENGLISH
8
Ingredients
2 Attach the blender bar to the motor unit ('click') (Fig. 2).
3 Put the plug in the wall socket.
4 Immerse the blade guard completely in the ingredients (Fig. 3).
5 Press the on/off button or the turbo speed button to switch on the appliance.
-
the speed, the shorter the processing time required.
- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
Note: The higher the speed, the shorter the processing time required.
6 Move the appliance slowly up and down and in circles to blend the ingredients (Fig. 4).
Mini chopper (HR1613/HR1611 only)
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc.
Be very careful when you handle the blade unit, the blades are very sharp. Be particularly careful
when you remove the blade unit from the chopper bowl, when you empty the chopper bowl and
during cleaning.
1 Put the blade unit in the chopper bowl (Fig. 5).
2 Put the ingredients in the chopper bowl.
See the table for the recommended quantities and processing times.
Mini chopper quantities and processing times (HR1613/HR1611 only)
Ingredients
Meat
Herbs
Parmesan cheese
Nuts and almonds
Garlic
3 Put the coupling unit on the chopper bowl (Fig. 6).
4 Fasten the motor unit onto the chopper lid ('click') (Fig. 7).
5 Put the plug in the wall socket.
6 Press the on/off button or the turbo speed button to switch on the appliance.
Note: If the ingredients stick to the wall of the chopper bowl, loosen them with a spatula or by adding
liquid.
Blending quantity
100-1000ml
Chopping quantity
100g
120g (max)
20g
50-100g (max)
100g
50g
Time
60sec.
Time
5 x 1sec.
5sec.
5 x 1sec.
15sec.
20sec.
5 x 1sec.
Speed turbo
12-16
Speed
1-4
turbo
8-12
turbo
turbo
turbo