Optional I/O Modules (Type C/Hdmi/Vga/Dp/Serial); Removing Optional I/O Modules (Hdmi/Vga/Dp/Serial) - Dell OptiPlex 3000 Micro Service Manual

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
NOTE: Repeat step 1 to 2 when installing more than one memory module in your computer.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
Next steps
1. Install the fan assembly.
2. Install the side cover.
3. Follow the procedure in

Optional I/O modules (Type C/HDMI/VGA/DP/Serial)

Removing optional I/O modules (HDMI/VGA/DP/Serial)

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the optional I/O modules and provide a visual representation of the removal
procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 35