Setting⑬ Mono Mode - Mitsubishi Electric KD Series User Manual

Address
Register name
7110 MonoModeSelect
*Val = 2 and 3 of this function is added for the DeviceFirmwareVersion 3.*.*.* or later.
5-2-14 Mono mode
[Function]
Select and switch a type of output image data when output
format when you set Output format to be Mono mode.
Output data : Green pixel output, Red pixel output
Blue pixel output and Luminance value output
Luminance value＝77/256×R＋150/256×G＋29/256×B
[Remark]
When you select RGB color mode and set
"MonoModeSelect=1" (Luminance value), each of R, G, and
B pixels outputs becomes the luminance value, providing
monochrome image.
TM－XJ101C
5-2 Setting⑬ Mono mode
R/W Val
R/W 0 to 3
Select Mono mode
(This function can change the output of RGB color mode.)
Mono mode 0: Green pixel output, 1: Luminance value output
2: R pixel output, 3: B pixel output
RGB color mode 0: Color output, 1: Luminance value output
2: Can not be selected, 3: Can not be selected
Result
© Mitsubishi Electric Corporation
Initial
0
77