Setting⑯ : Mono Mode - Mitsubishi Electric KD Series User Manual

5-2 Setting⑯: Mono mode Setting
Address Register name
7110h MonoModeSelect
5-2-18 Mono mode Setting
[Function]
Select and switch a type of output image data when output
format when you set Output format to be Mono mode.
Output data : Red , Green or Blue pixel output,
Luminance value output
Luminance value＝77/256×R＋150/256×G＋29/256×B
[Remark]
When you select RGB color mode and set
"MonoModeSelect=1" (Luminance value), each of R, G,
and B pixels outputs becomes the above value, providing
monochrome image.
TM-XJ959A
R/W Parameter
Data
Select Mono mode
(This function can change the output of RGB color mode.)
Mono mode 0: Green pixel output, 1: Luminance value output
R/W 0 to 3
RGB color mode 0: Color output, 1: Luminance value output
Function
2:Red pixel output, 3:Blue pixel output
2: prohibit selection, 3: prohibit selection
Initial
0
83
© Mitsubishi Electric Corporation