Mitsubishi Electric KD Series User Manual page 92

Appendix A: Control register list ③
Address Register name
7004h BaudRateSelect
7008h ContTimeOut
7010h LedSelector
7014h LedPulseDivision
7018h LedPulseWidthA
701Ch LedPulseWidthB
7020h LedEffectivePeriod
7030h ShutterEnable
7034h ShutterEnd
7038h ShutterWidth_R
703Ch ShutterWidth_G
7040h ShutterWidth_B
7050h DarkCorrectionEnable
7054h DarkCorrectionExecute R/W
7070h WhiteCorrectionEnable R/W
7074h WhiteTarget_R
7078h WhiteTarget_G
707Ch WhiteTarget_B
TM-XJ959A
R/W Parameter
Data
Switch baud rate of UART communication in Camera Link®
R/W 0 to 2
0: 9.6kbps, 1: 19.2kbps, 2: 115.2kbps
Setting time of time out for UART communication in Camera Link®
R/W 0 to 65535
0:Disable, 1:0.2seconds afterwards every 0.2seconds
Illumination(LED) control
0:OFF
1: Upper-stream Illumination(A) ON
R/W 0 to 3
2: Down-stream Illumination(B) ON
3: Both Upper-stream (A) and Down-stream (B) ON
Set illumination( LED) Pulse division
R/W 0 to 3
0:OFF, 1: 2 pulses, 2: 4 pulses, 3: 8 pulses
R/W 0 to 65535 Upper-stream illumination( A) period or pulse width
R/W 0 to 65535 Down-stream illumination( B) period or pulse width
R/W 0 to 65535 Set illumination( LED) Effective Period
Set Electric shutter On/Off
R/W 0 or 1
0:OFF /1:ON
R/W 0 to 32765 Set exposure end timing
R/W 1 to 32764 Set Red exposure period
R/W 1 to 32764 Set Green exposure period
R/W 1 to 32764 Set Blue exposure period
Set Dark correction On/Off
R/W 0 or 1
0:OFF /1:ON
1
Generate Dark correction data
Set White correction On/Off
0 or 1
0:OFF /1:ON
R/W 0 to 4095 Set Red White Correction Target value
R/W 0 to 4095 Set Green White Correction Target value
R/W 0 to 4095 Set Blue White Correction Target value
Camera Link® is a trade mark registered by AIA（Automated Imaging Association).
Function
© Mitsubishi Electric Corporation
Initial
0
150
3
0
450
450
692
0
130
1
1
1
0
-
0
4000
4000
4000
92