About Flashing Of Led - Pioneer PRO-730HDI Service Manual

1
7.4 About flashing of LED
Show the following state by flashing of LED.
A
1. Specification of red LED
• Standby
lighting
• After having shifted from power management operation to normal standby (operation when released the power management by the
power off), continue lighting after flashing three times: Repeat 500ms off and 500ms on three times, and continue lighting.
• Relay welding
Repeat three times flashing and once stop: Repeat 100ms on ,100ms off ,100ms on ,100ms off ,100ms on ,100ms off and 1S off.
2. Specification of green LED
• Power on
B
lighting
• During power-saving mode operation (power management)
Flashing: Repeat 2s on and 2s off.
About power management:
When input signal disappears only at the time of INPUT5 and 6, it becomes the power-saving mode.
C
D
E
F
94
1
2
PRO-730HDI
2
3
3
4
4