Troubleshooting - Philips CSS5123/12 User Manual

10 Troubleshooting

Warning
•
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
Picture
No picture.
•
Make sure that the TV is switched to the
correct source for the SoundBar.
No picture on a TV connected through HDMI.
•
Make sure that you use a High Speed HDMI
cable to connect the SoundBar and TV.
Some Standard HDMI cables do not display
properly for some images or Deep Color.
•
Make sure that the HDMI cable is not faulty.
If it is faulty, replace it with a new cable.
Sound
No sound from SoundBar speakers.
•
Make sure that the SoundBar is not muted.
•
Connect the audio cable from your
SoundBar to your TV or other devices. You
do not need a separate audio connection
when the SoundBar and TV are connected
through HDMI ARC connection.
•
Set up the audio for the connected device.
•
Reset your SoundBar to its factory settings.
Switch it off, and then switch on again.
•
On your SoundBar, press the correct source
button to select the correct audio input.
No sound from wireless subwoofer.
1
Switch off the SoundBar and then switch it
on again.
2
Switch the SoundBar to AUX source.
3
Press and hold CONNECT on the
subwoofer until the indicator on the back of
the subwoofer blinks.
4
Press and hold Navigation button
for at least three seconds.
» When the wireless connection succeeds,
the indicator on the subwoofer lights up.
» If the wireless pairing fails, repeat steps 1
to 4 to connect your subwoofer to the
SoundBar.
Distorted sound or echo.
•
If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Audio and video are not synchronized.
•
1) Press (Home). 2) Select [Setup],
and then press OK. 3) Select [Audio] >
[Lip Sync], and then press OK. Press the
Navigation buttons (
[Auto] or [Manual] and synchronize audio
and video (see 'Synchronize picture and
sound' on page 15).
Play
Cannot play a DivX file.
•
Make sure that the DivX file is encoded
according to the 'SoundBar' with the DivX
encoder.
•
Make sure that the DivX file is complete.
DivX or RMVB/RM subtitles do not display
correctly.
•
Make sure that the subtitle file name is the
same as the movie file name (see 'Subtitles'
on page 16).
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the
SoundBar.
•
Make sure that the file system on the
USB storage device is supported by the
SoundBar.
EasyLink does not work.
•
Make sure that the SoundBar is connected
to a Philips brand EasyLink TV, and the
EasyLink option is turned on (see 'Switch
on' on page 21).
When you switch on the TV, the SoundBar
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
SoundBar work independently, switch off
EasyLink.
(right)
/ ) to select
EN
29