Connect Your Soundbar; Subwoofer - Philips CSS5123/12 User Manual

v INFO
Display information about the current
picture, audio, or video.
AUDIO SOURCE
w
•
AUX: Switch your audio source to the
AUX connection.
•
COAXIAL:Switch your audio source
to the coaxial connection.
•
OPTICAL: Switch your audio source
to the optical connection.
EasyLink controls
With Easylink, you can control your SoundBar,
TV and the connected devices with the standby
button on your SoundBar remote control.
•
(Standby-On): Press and hold to switch
your SoundBar, TV, and the connected
devices to standby.
5 Connect your
SoundBar
This section helps you connect your SoundBar to a
TV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick start
guide. For a comprehensive interactive guide, see
www.connectivityguide.philips.com.
Note
•
For identification and supply ratings, refer to the
type plate at the back or bottom of the product.
•
Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.

Subwoofer

Follow the steps below to position and connect
your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from your SoundBar, and ten
centimeters away from the wall.
For best results, place your subwoofer as shown
below.
Note
•
The SoundBar and the subwoofer
automatically pair up when you switch on the
SoundBar and the subwoofer.
EN
9