Play audio from SoundBar
Play the audio from a connected device through
your SoundBar.
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
4
Press AUDIO SOURCE button on your
remote control to select the audio output
for the connected device.
•
AUX: Switch your audio source to the
AUX connection.
•
COAXIAL: Switch your audio source
to the coaxial connection.
•
OPTICAL: Switch your audio source
to the optical connection.
5
Press OK to confirm.
Note
•
To play TV audio from your SoundBar through
HDMI ARC connection, select the correct
video input on the TV and turn off the TV
speakers (see 'Connect to TV' on page 10).
•
For details, see the TV user manual.
EN
22
7
Change settings
This section helps you to change the settings of
your SoundBar.
Caution
•
Most of the settings are already configured
with the best value for your SoundBar. Unless
you have a reason to change a setting, it is best
to leave it at the default value.
Picture
Change the picture settings to suit your
preferences.
Note
•
The best setting is automatically selected for
the TV. If you change the setting, make sure
that the TV supports the new settings.
Picture settings and format
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Video] > [Aspect Ratio], and then
press OK.
4
Select one of the following settings, and
then press OK:
•
[16:9]: Display picture in 16:9 aspect
ratio if the source is 16:9.
•
[Pan Scan 4:3]:Adjust the 16:9 source
to display picture in 4:3 aspect ratio.
•
[Letter Box 4:3]: Adjust the 16:9
source to display picture in 4:3 aspect
ratio with black borders on top and
bottom.
•
[16:10]: Display picture in 16:10 aspect
ratio if the source is 16:10.