Install satellite channels
(For certain models only)
If your satellite is connected to the SAT
connector, you can receive satellite channels.
1.
While watching TV, press
2.
Select [Setup] > [Search for satellite] >
[Reinstall channels].
3.
Follow the on-screen instructions to
complete the installation of satellite
channels.
4.
Once complete, select [Finish], and then
press OK.
Fine-tune analogue channels
If the reception of an analogue TV channel is
poor, try fine tuning the TV channel.
1.
Press
.
2.
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual installation] > [Fine tune], and
then press OK.
3.
Press ▲ ▼ or ▼ to fine tune the channel.
4.
When the correct channel frequency is
selected, select [Done], and then press
OK.
5.
Select [Store current channel] to store
the fine tuned channel under the current
channel, or select [Store as new channel]
to store under a new channel number.
Change language settings
Audio, subtitle, teletext languages
Digital TV channels may stream several
audio, subtitle and teletext languages with
a broadcast. Set preferred languages when
multiple languages are available.
1.
2.
3.
.
4.
•
Menu language
1.
2.
3.
Press
.
Select [Setup] > [Channel settings] or
[Satellite settings] > [Language].
Select one of the following settings, then
press OK:
• [Primary audio] / [Secondary audio] :
Selects the available audio language for
digital channels.
• [Primary subtitles] / [Secondary
subtitles] : Selects the available
subtitle language for digital channels.
• [Primary Text] / [Secondary Text] :
Selects the available teletext for digital
channels.
• [Hearing impaired] : Enables or
disables hearing impaired subtitles.
• [Visually impaired] (UK only) : Selects
the device for audio output.
• [Volume - Visually impaired] (UK
only) : Adjusts the volume of the
visually impaired audio.
• [Preferred audio format] : Select
[Standard] to receive standard audio
format (MPEG). Select [Advanced] to
receive advanced audio formats (AAC,
EAC-3 or AC-3 if available).
• [Mono/Stereo] : Select [Mono] or
[Stereo] if stereo broadcasting is
available.
Press
to exit.
Tip
Set a secondary language in the same menu. You
receive this language if the primary language is
unavailable.
While watching TV, press
Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
Select a menu language from the list, then
press OK.
.
EN
25