Table of Contents
Advertisement
Smart Clone
Place a USB Memory stick in the USB side I/O
connector
Layer 1
Layer 2
Smart Clone
USB to TV
TV will read and store Cloning data from USB
stick
Layer 1
Layer 2
Smart Clone
TV to USB
TV will store Cloning data to USB stick
RF Download
Instead of using USB memory device to do
cloning (tbd) and firmware update, this
upgrading is also possible using the RF
infrastructure. This is covered by Philips
Hospitality RF Download and allows a
simultaneous upgrade of all installed
televisions.
[SW Types]
Defining the software parts to be upgraded:
[SSB Firmware]
TV Firmware
[SSB NVM]
TV settings
[StandBy Firmware]
Firmware for the StandBy CPU
[ThemeTV]
Supporting files for ThemeTV:
- R1.png – R15.png
- R1s.png – R15s.png
- Background.png
- Header.png
- Footer.png
[All]
All of above
36
EN
Layer 3
OK or >
Layer 3
OK or >
[Program Info]
This function is to set the necessary DVB
parameters to locate the proper VSecure RF
channel to load the VSecure RF Static or RF
Dynamic key(s):
[Frequency]
Frequency of MUX 0706)
[Medium]
Cable or Antenna (DVB T/C)
[Service ID]
# # # # #
[ONID]
# # # # #
[NID]
# # # # #
[TSID]
# # # # #
[Symbol Rate]
# . # # #
[Modulation]
QAM16, QAM32, QAM64,
QAM128, QAM256
Above parameters must match head-end configuration
[Program Info]
To initiate RF Download just press OK or >.
(
(00001)
(00001)
(00001)
(00001)
(6.900)
Hide quick links:
Advertisement
Table of Contents
