Update Software - Philips 22HFL4372D/10 User Manual

Shop or home mode
The flexibility to change settings is limited if
the TV location is set to [Shop] mode. Set the
TV location to [Home] mode to access all TV
settings.
1.
While watching TV, press
2.
Select [Setup] > [TV settings] >
[Preferences] > [Location] > [Home] or
[Shop], then press OK.
3.
Restart the TV.
Stand mount or wall mount
Specific TV settings are applied to suit the
mounting location of the TV.
1.
In the [Preferences] menu, select [TV
placement] > [On a TV stand] or [Wall
mounted], then press OK.
Update software
TV: Check version
1.
Press .
2.
Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is
displayed.
TV: USB update
Before performing this procedure be sure to:
• Set aside some time to complete the
entire update.
• Have available a USB flash drive with at
least 256 MB of storage space.
• Have access to a computer with a USB
port and internet access.
1.
2.
.
•
TV: Internet update
If your TV is connected to a router that is
connected to the Internet, you can update the
TV software directly from the Internet. You
need a high speed Internet connection.
Press
OK.
Select [Internet] and press OK. Follow the
instructions on screen.
When the update is done, the TV switches off
and back on again automatically. Wait for the
TV to switch back on; do not use the Power
switch on the TV.
If the TV is connected to the Internet, the TV
displays a message about the availability of
new software at start-up.
Press .
Select [Setup] > [Update software], then
press OK. The update assistant starts.
Follow the on-screen instructions to
complete the update
Note
If you already have the upgrade file
downloaded onto a USB flash drive,
connect it to the TV. Then, select [Setup] >
[Software settings] > [Local updates].
> [Setup] > [Update now] and press
EN
27