Panasonic CW-8572-B Instruction Manual
Panasonic CW-8572-B Instruction Manual

Panasonic CW-8572-B Instruction Manual

Dvd-rom & cd-r/rw combination drive

Advertisement

Quick Links

DVD-ROM & CD-R/RW COMBINATION DRIVE
CW-8572-B / CW-8572-C
INSTRUCTION MANUAL
Please read through these instructions before operating this unit.
Interface : ATAPI

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic CW-8572-B

  • Page 1 DVD-ROM & CD-R/RW COMBINATION DRIVE CW-8572-B / CW-8572-C INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI...
  • Page 2: Table Of Contents

    DVD-ROM & CD-R/RW COMBINATION DRIVE CW-8572-B / CW-8572-C INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI TABLE OF CONTENTS IMPORTANT SAFETY NOTICE ................LASER SAFETY INFORMATION ................A-1 INTRODUCTION ......................A-4 1. PRECAUTIONS WHEN OPERATING ..............A-5 1.1 PRECAUTIONS WHEN TRANSPORTING ............
  • Page 3: Important Safety Notice

    (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet. For USA (Model CW-8572-B only) FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE STATEMENT Class B Computing Device NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 4: Laser Safety Information

    LASER SAFETY INFORMATION Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products.
  • Page 5 CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT EN60825 APPAREIL A LASER DE CLASSE 1 C A U T I O N – L A S E R R A D I A T I O N W H E N O P E N . D O N O T S T A R E I N T O B E A M . V O R S I C H T –...
  • Page 6 for DVD-ROM or DVD-RAM for CD-R/RW or CD-ROM LASER Specification LASER Specification Type: Semiconductor laser InGaAlP / GaAs Type: Semiconductor laser GaAlAs Wave Length: 650 ± 15 nm Wave Length: 785 ± 5 nm θ θ = 20 ° ~ 35 ° (Typical 27 °) Divergence: Divergence: = 15 °...
  • Page 7: Introduction

    INTRODUCTION This DVD-ROM & CD-R/RW Combination drive features both DVD/CD media reading and CD-R/RW media writing technology. This drive unit uses DVD-ROM discs which bear the following mark. This drive unit uses CD-R discs which bear the following mark. COMPACT Recordable This drive unit uses CD-RW discs which bear the following mark.
  • Page 8: Precautions When Operating

    CHAPTER 1 PRECAUTIONS WHEN OPERATING 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments.
  • Page 9 Do not write and paste paper on the recording/ reading side of the disc. Do not paste paper to the all surface of the CD-R/RW disc. When labelling a CD-R/RW disc for identification purposes, write only on the premarked label side using a soft, felt tip marker.
  • Page 10: Parts And Functions

    CHAPTER 2 PARTS AND FUNCTIONS 2.1 FRONT VIEW DISC TRAY Accepts a disc. HEAD PHONE JACK (Model CW-8572-B only) Headphone can be connected using a 3.5mm stereo mini plug. VOLUME (Model CW-8572-B only) Adjusts audio output level of Headphone. BUSY / WRITING INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD.
  • Page 11: Connections

    CHAPTER 3 CONNECTIONS 3.1 CONNECTING VIEW DC (IN) Connector Interface Connector Jumper Pin DC Power Connector Audio Out Connector Digital Audio Out Connector Jumper Drive-Select (Master/Slave/CSEL) Cable select (CSEL) Interface Cable Slave Master CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS •...
  • Page 12: General Description

    CHAPTER 5 GENERAL DESCRIPTION 5.1 FEATURE SUMMARY Embedded ATAPI Interface. Automatic Loading with tray. Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) Both DVD & CD-R/RW media readable or writable MS-DOS CD-ROM Extensions Available. 5 1/4”...
  • Page 13: Specification Summary

    CHAPTER 6 SPECIFICATION SUMMARY 6.1 PERFORMANCE Disc diameter 12cm, 8cm (CD-ROM / DVD-ROM) Disc speed CD-ROM (CAV mode) *1 8560 r/min DVD (CAV mode) 6895 r/min Data capacity CD : 703 / 797 Mbytes [ typical ] (Mode 1/ Mode 2) (79 min and 58 sec disc) DVD : 4.7 Gbytes (DVD-R)
  • Page 14: Error Rates

    NOTE: *1 CAV : Constant Angular Velocity *2 CLV: Constant Linear Velocity *3 ZCLV: Zoned Constant Linear Velocity *4 Random access time (CD) : Average Data read over the complete area from 00 min. 02 sec. 00 block to 59 min. 58 sec. 74 blocks, more than 2000 times including latency and layered error correction time.
  • Page 15: General Performance

    6.4 GENERAL PERFORMANCE Power rating +5 V 1.0 A +12 V 2.0 A Dimensions (W x H x D) 146 x 41.3 x 190 mm (exclude Front Bezel) Weight 915 g [ typical ] 6.5 ENVIRONMENTAL CONDITIONS Operating • Temperature 5 ~ 50 °C •...
  • Page 16 APPENDIX A. Easy Installation of the Device Driver for DOS / Windows 3.1 The CW-8572-B/C DVD-ROM & CD-R/RW Combination drive must be installed into your host computer, before installing this device driver. 1. Turn the power of your personal computer on. If your system automatically loads Windows, you must exit Windows and reach the DOS prompt C:\ .
  • Page 17 Weight and dimensions shown are approximate. Specifications are subject to change without notice.

This manual is also suitable for:

Cw-8572-c

Table of Contents