Setting A Programme; Starting The Programme; Programme Progress; Changing The Programme Or Adding More Laundry - Siemens iQ500 WT47R461ES Installation And Operating Instructions Manual

Close the appliance door.
5.
Caution!
Risk of material damage to the
appliance or laundry.
Make sure that laundry is not
trapped in the door.
The appliance's drum is lit up
Note:
after the door is opened and closed and
once the programme has started. The
drum's interior light goes out on its own.

Setting a programme

If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
~ Page 29
Set the programme you require.
1.
Operating the appliance
Adjust the programme settings, if
2.
required.
~ "Programme settings"
on page 22

Starting the programme

Press ‹ inicio/pausa+carga (Start/
Reload).
If you want to prevent the
Note:
programme from being adjusted
inadvertently, activate the childproof
lock. ~ Page 29

Programme progress

The programme status will be indicated
on the display.
When a programme is selected,
Note:
the expected drying time for the
maximum permitted load is displayed.
The moisture sensor measures the
residual moisture in the laundry as it is
being dried. The programme duration
and the remaining time indicated on the
display are automatically adjusted as
the programme progresses, depending
on how damp the laundry is (exception:
Timed programmes).
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
Open the door or press ‹ inicio/
1.
pausa+carga (Start/Reload) to
pause the programme.
The drum will continue to
Note:
rotate when the CoolDown process
is in progress, even if you have
paused the programme. You can
stop the CoolDown process at any
time by opening the door.
Add or remove laundry.
2.
en
25