Siemens iQ500 WT47R461ES Installation And Operating Instructions Manual page 32

Draining the condensation water
en
Detach the condensation hose from
3.
the connector.
The appliance comes
Note:
delivered with the condensation
hose already fitted to the connector.
Place the condensation hose in the
4.
"parked" position.
Take the drain hose from the
5.
accessories and push it fully onto
the free connector.
32
Push the drain hose into the
6.
appliance's hose guide.
Take care not to kink the
Note:
drain hose when doing this.
Secure the other side of the drain
7.
hose using the remaining
accessories, depending on the
connection situation.
Washbasin:
Siphon:
The connection point must be
secured using a hose clamp (12-
22 mm clamping range, available
from specialist retailers).
When connecting to a siphon, make
sure that the drain hose is routed at
a height of at least 80 cm, but no
more than 100 cm.