Siemens iQ500 WT47R461ES Installation And Operating Instructions Manual page 30

Appliance settings
en
Release ‹ inicio/
4.
pausa+carga (Start/Reload).
You can now alter the appliance
settings.
Adjusting the volume of the audible
notification signals
You can adjust the volume of the
notification signal emitted at the end of
the programme.
Adjust the appliance setting as
follows:
Set the programme to position 3.
1.
The current setting will appear on the
display.
Press û (Drying Time)
2.
or termin. B(Ready In) until the
required setting appears on the
display.
Settings:
0 Off
1 Low
2 Medium
3 High
4 Very high
Alter any additional appliance
3.
settings you require or save and exit
the appliance settings.
Adjusting the volume of the audible
operating signals
You can adjust the volume of the
buttons for operating the appliance.
30
Adjust the appliance setting as
follows:
Set the programme to position 4.
1.
The current setting will appear on the
display.
Press û (Drying Time)
2.
or termin. B(Ready In) until the
required setting appears on the
display.
Settings:
0 Off
1 Low
2 Medium
3 High
4 Very high
Alter any additional appliance
3.
settings you require or save and exit
the appliance settings.
Changing the spin speed
If you have spun the laundry before
drying it, you can set this spin speed on
the appliance. The drying time is
increased or decreased in accordance
with the set spin speed.
The set spin speed does not
Note:
change the drying time for the time
programme.
Adjust the appliance setting as
follows: